Physical Interface - TP-Link TL-WPA9610 User Manual

Chapter 1
Name
Wireless 2.4GHz
Wireless 5GHz
1 2 2

Physical Interface

Reset Button
Ethernet Port
Reset
Press and hold the Reset button for at least 5 seconds to reset the powerline extender
to factory default settings. When Reset is triggered properly, all LEDs will turn off and
Status
On The 2.4GHz wireless band is enabled.
Off The 2.4GHz wireless band is disabled.
Slowly: The powerline extender is cloning 2.4GHz
wireless network settings from the main router.
Flashing
Quickly: The powerline extender is syncing 2.4GHz
wireless network settings from an existing powerline
extender.
On The 5GHz wireless band is enabled.
Off The 5GHz wireless band is disabled.
Slowly: The powerline extender is cloning 5GHz wireless
network settings from the main router.
Flashing
Quickly: The powerline extender is syncing 5GHz
wireless network settings from an existing powerline
extender.
Get to Know Your Powerline Extender
Indication
Plug
Pair Button
LED Button
Wi-Fi Button
4