Password; System Log - TP-Link TPL-WPA4220 User Manual

Some settings of the device will take effect only after rebooting, which include:
Change the powerline extender's IP Address (system will reboot automatically).
•
Change the Wireless configurations.
•
Upgrade the firmware of the powerline extender (system will reboot automatically).
•
Restore the powerline extender's settings to the factory defaults (system will reboot
•
automatically).
Update the configuration with the file (system will reboot automatically).
•

3.6.5 Password

Selecting System Tools > Password allows you to change the factory default user name and password
of the device on the screen shown in Figure 3-27.
It is strongly recommended that you change the factory default user name and password of the device.
All users who try to access the device's web-based management page or Quick Setup will be prompted
for the device's user name and password.

Note:
The new user name and password must not exceed 14 characters in length and must not include any
spaces. Enter the new Password again to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.

3.6.6 System Log

Selecting System Tools > System Log allows you to query the Logs of the device on the screen shown
in Figure 3-28.
TL-WPA4220 AV600 Powerline Wi-Fi Extender
Figure 3-27 Password
27