Version menu display: - LED:
• This will display the current software code of eth ECD-200BT
• Tap the switch until is displayed and hold until "" is displayed
• The display will show the first half of the software code, pressing and releasing the button wil
show the second half of the code
• Example = then
• Pressing and holding the switch will exit to the main menu
o Tappng the switch will generate a LED test pattern
o Press and hold the switch to save until "" and exit to the main menu
Bluetooth menu display: - LED:
Two options are available for the Dakota Digital Accessory app: accessing the Bluetooth setup all the
time or only when the ECD-200BT has manually entered setup. "" indicates the Bluetooth
connectivity will be active anytime the key is on, allowing speedometer adjustments to be made while
driving, while "" allows changes when the ECD unit is in setup mode only.
• Press and release the switch until is displayed and hold until "" is displayed
• Bluetooth ID will display for the app. Example "" - tap switch - "". Hold to continue
• Tap the switch to select between the following options
o = Bluetooth is available all the time. App changes can be made in real time driving.
o = Bluetooth setup option are only available to the app when the ECD-200BT has
been placed in setup mode with the function switch.
• Press and hold to save either option.
• The app has a "Safe Mode" that basically sets the Bluetooth to setup mode only.
• To clear Safe Mode, enter the Bluetooth menu, select , then press and hold until "" to
save.
7
MAN# 650704A