Selecting Settings For A Directory Server - Epson BrightLink EB-725Wi User Manual

• Authentication lets you set the type of authentication expected by the mail server.
• User name lets you enter a user name for the mail server. You can enter up to 64 alphanumeric
characters. Do not use a colon (":") or spaces.
• Password lets you enter a password for the mail server. You can enter up to 64 alphanumeric
characters. Do not use a colon (":") or spaces.
• From lets you enter the email address to be displayed to the sender. You can enter up to 64
alphanumeric characters. Do not use spaces or the following symbols: " ( ) , : ; < > [ \ ]
• Default e-mail address lets you enter an optional address for testing. You can enter up to 64
alphanumeric characters. Do not use spaces or the following symbols: " ( ) , : ; < > [ \ ]
• Send a test e-mail lets you connect to the SMTP server and send a test email to the address you
set as the default.
• Disallow Address Input controls whether you can enter email addresses manually. When
enabled, you can only choose email addresses from an address book or directory service.
Note: Use the displayed keyboard to enter the addresses. Press the arrow buttons on the remote
control to highlight numbers or characters and press
5. When you finish selecting settings, press the Menu button to exit the menus.
Parent topic:

Selecting Settings for a Directory Server

You can select the settings for specifying a email directory server for your projector.
1. Press the Menu button on the remote control.
Selecting Whiteboard Settings
Enter to select them.
231