Table 8 - Phase Drive Pl8 Connector For St750 Phase Driver Pcb (6 Phase) - Siemens ST750 General Handbook

PL7
Pin No
10 Not used (for isolation purposes)
11 Red Phase D
12 Not used (for isolation purposes)
13 Amber Phase D
14 Amber Phase D
15 Not used (for isolation purposes)
16 Green Phase D
Coding Details: The plug mount connector on the Phase Drive board PL7 has
Table 8 – Phase Drive PL8 Connector for ST750 Phase Driver PCB (6 Phase)
PL8
Pin No
1 Red Phase 5 (Unmonitored)
2 Amber Phase 5 (Unmonitored)
3 Green Phase 5 (Unmonitored)
4 Red Phase 6 (Unmonitored)
5 Amber Phase 6 (Unmonitored)
6 Green Phase 6 (Unmonitored)
Coding Details: This connector has no coding element, as it is the only 6-way
667/HB/33750/000
Signal Phase Drive O/P
coding pins 1 and 16 fitted, with the cable fitted socket connector
that mates with PL7 having coding pins 2 and 15 fitted. This
coding prevent the incorrect connection between PL7 and PL6.
For more details see the following diagram:
Mating Half PL7
2
1
PCB
Signal Phase Drive O/P
connector.
15
PL7
Page 74
ST750 G H
ENERAL
Softwire kit
Cableform
667/1/27877/000
Red RB
Yellow YB
Green GB
16
Softwire kit
Cableform
667/1/27877/050
Colour Ident
Red RED5
Yellow YLW5
Grey GRN5
Red RED6
Yellow YLW6
Grey GRN6
ANDBOOK
Issue 6