Chapter 3 Connection; Ethernet Port; Sfp/Sfp+ Slot; Console Port - TP-Link TL-SG3452XP Installation Manual

Chapter 3 Connection

3.1

Ethernet Port

Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows.
Figure 3-1 Connecting the RJ45 Port
RJ45 Port
3.2

SFP/SFP+ Slot

The following figure demonstrates the connection of SFP/SFP+ slot to an SFP/SFP+ module.
Figure 3-2 Inserting the SFP/SFP+ Module
3.3

Console Port

CLI (Command Line Interface) enables you to manage the switch, thus you can load the CLI after
connecting the PCs or Terminals to the console port on the switch via a cable (an RJ45 console cable
is provided, while micro-USB cable is not provided).
JetStream L2/L2+ Managed Switch
RJ45 Cable
SFP/SFP+ Slot
SFP/SFP+ Module
Connection 15