Advertisement
10. Push the new bulb into the taillamp assembly and
turn it clockwise to lock it into place.
11. Reinstall the taillamp assembly into the quarter
panel.
12. Push the wiring harness straight into the taillamp
assembly and push the tab down.
13. Reinstall the outer two screws into the taillamp
assembly.
14. Reinstall the trunk trim and the fasteners.
To replace a back-up lamp bulb:
1. Open the trunk. See
2. Locate the back-up lamp bulb assembly in the
trunk lid.
6-54
3. Turn the bulb socket counterclockwise and pull it
out of the lamp assembly.
On vehicles that have a back-up lamp cover, first
remove it by pressing the tab at the top.
4. Pull the old bulb straight out of the bulb socket.
5. Push the new bulb straight into the bulb socket
until it clicks.
.
6. Push the bulb socket into the lamp assembly and
turn it clockwise to lock it into place.
Advertisement
