Chevrolet 2010 Camaro Owner's Manual page 316

13. Tighten the wheel nuts firmly
in a crisscross sequence, as
shown.
Wheel nuts that are improperly or
incorrectly tightened can cause
the wheels to become loose or
come off. The wheel nuts should
be tightened with a torque wrench
to the proper torque specification
after replacing. Follow the torque
specification supplied by the
aftermarket manufacturer when
using accessory locking wheel
nuts. See
original equipment wheel nut
torque specifications.
(Continued)
Storing a jack, a tire, or other
equipment in the passenger
compartment of the vehicle could
for
cause injury. In a sudden stop or
collision, loose equipment could
strike someone. Store all these in
the proper place.
To store a flat or spare tire and
tools:
1. Replace the jack and tools.
2. Replace the spare tire cover.
3. Turn the retainer nut clockwise
to tighten.
4. Replace the rear trunk carpet.
5. Place the flat tire face up on the
load floor.