Gigabyte GA-Z97-HD3P User Manual page 8

Storage Interface Š Chipset:
- 1 x M.2 Socket 3 connector
- 1 x SATA Express connector
- 6 x SATA 6Gb/s connectors
(M.2, SATA Express, and SATA3 4/5 connectors can only be used one at a
time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is
installed.)
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
USB Chipset:
Š
- 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
- 8 x USB 2.0/1.1 ports (2 ports on the back panel, 6 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Connectors Š
1 x M.2 Socket 3 connector
Š
1 x SATA Express connector
Š
6 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
1 x USB 3.0/2.0 header
Š
3 x USB 2.0/1.1 headers
Š
1 x serial port header
Š
1 x parallel port header
Š
1 x Clear CMOS jumper
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
1 x D-Sub port
Connectors Š
1 x DVI-D port
Š
1 x HDMI port
Š
4 x USB 3.0/2.0 ports
Š
2 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side
Š
Speaker Out, Line In, Line Out, Mic In)
iTE ® I/O Controller Chip
I/O Controller
Š
Hardware System voltage detection
Š
CPU/System temperature detection
Monitor
Š
CPU/System fan speed detection
Š
CPU/System overheating warning
Š
CPU/System fan fail warning
Š
CPU/System fan speed control
Š
* Whether the fan speed control function is supported will depend on the cooler you
install.
- 8 -