Next Screen - Canon Color imageCLASS LBP622Cdw Getting Started

For details
"Setting Up Using the Setup Guide" in the User's Guide
3.
Take note of the SSID and network key.
• Check the label on the router.
• The setting operation is easier if the router is
provided with a WPS mark.
4.
Set the access point and network key
according to the screen below.
For more
information, refer
to the manual.
OK
1. Select <OK>.
2. Select <SSID Settings>.
3. Select <Select Access Point>.
4. Select the access point (SSID).
5. Enter a network key, and select <Apply>.
6. Select <Yes>.
• Wait until message <Connected.> is
displayed.
7. Select <Close>.
• The IP address will be automatically
configured in a few minutes.
To view a video guide on the process
You can find a video and guide to assist the
process for the Wireless Network connection
from the URL below. Viewing these guides will
ensure a smooth setup of the device into your
existing wireless environment.
https://www.usa.canon.com/WirelessHelp/
User's Guide
User's Guide
"Toner replenishment service" settings
Precautions
• Use of the toner replenishment service
requires prior registration with select
retailers. This service is only available
in certain countries/regions and for
certain models.
Through the toner replenishment service, new
toner cartridges are automatically delivered to you
before your existing toner cartridge is used up.
• This service can be set up through <Toner
Delivery Settings> displayed on the Home screen.
Did you sign up for
toner replenishment
service when you
purchased this
product?
To continue setup
for automatic toner
1.
Press .
OK
delivery, press OK,
2.
Press .
then press OK again
OK
• To skip "Toner replenishment service" (or set it
(if you agree) on
later), press and proceed to Step 4.
the next screen.
3.
Press *Network connection .
OK
• If an error message appears, follow the on-screen
required to complete
instructions to resolve it.
registration.
4.

Next Screen:

Install the driver and software.
P.9 "Installing the software"
Press OK
Now you are finished with the
configuration of the initial settings.
Quick Setup
En
7