Table of Contents
Advertisement
Air Conditioner Features & Operating Instructions
Air Conditioner Features
TURNS UNIT
ON OR OFF
*Refer to the Quick Start Guide that came with your Smart Air Conditioner for detailed instructions on setting up your air
conditioner for connected operation from your smart phone or tablet.
Note: The display and indicator lights will turn off if the unit does not receive any control signal in 60 second.
Press any button then the display will resume.
REMOTE CONTROL
Operating Instructions
NOTE
The following instructions represent the touch pad. The same instructions can be used for the remote control.
TO TURN UNIT ON:
DO THIS:
PRESS ON/OFF BUTTON
2009 Electrolux Home Products, Inc.
6
ELECTRONIC CONTROL
Before you begin, thoroughly familiarize yourself with the control panel and remote
control and all its functions (as shown below). The unit can be controlled by the
touch pad alone, with the remote control, or with the Frigidaire app*.
TEMPERATURE
SET MODE
TO REPLACE BATTERY
Battery Size: CR2025
Turn Remote Control upside down. Squeeze tab and
pull to remove battery tray. Place battery in tray with
POSITIVE("+") side facing UP, according to diagram.
Re-insert battery tray.
ADJUSTS
DISPLAYS
SETS FAN
TEMPERATURE
YOU WILL SEE:
Note: The unit will run in eco (energy saver) mode when
used for the first time. We recommend leaving the unit in
eco mode to help save energy and money. For more
information please see section on 'Eco Mode'.
SCHEDULE
WIFI
INDICATOR
CHECK FILTER
SPEED
RESET BUTTON
TAB
All rights reserved.
Advertisement
Table of Contents
