Table of Contents
Advertisement
Operating Instructions
(continued)
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder to clean the Air Filter (See
Care and Cleaning) for more efficient operation. The LED
(light) will illuminate after 250 hours of operation. To reset
after cleaning the filter, hold the " reset filter" button 3
seconds and the light will go off.
FAULT CODES:
If the display reads "AS" , a sensor has failed. Contact your
Authorized Frigidaire Service Center.
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE
UP/DOWN BUTTONS
SIMULTANEOUSLY FOR 3 SECONDS
2009 Electrolux Home Products, Inc.
Operating Instructions
DIMMING DISPLAY:
After 60 seconds of control inactivity the display and
indicator lights will turn off. Press any button on the
control panel or remote control and the display will
resume. Please note that if the unit is in eco mode
and the set temperature has been reached the unit
may appear off. However, the unit is on and will
continue to sample the air every 10 minutes. To
confirm, press any button on the control panel or
remote control to illuminate the display to show unit
in eco mode.
YOU WILL SEE:
Note: The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius.
DO THIS:
HOLD RESET FILTER
BUTTON 3 SECONDS
All rights reserved.
9
Advertisement
Table of Contents
