Table of Contents
Advertisement
36
www.electrolux.com
Malfunction
Machine
does not dry
or does not
dry properly:
Display time
is frozen at
the end of
drying cycle
for more than
30 minutes:
NOTE
If you are unable to identify or solve the
problem, contact our service centre.
Before calling service centre, make a
note of the model, serial number and
purchase date of your machine: the
Service Centre will require this
information.
Possible cause
The "Time Dry" or the "Dryness
Level" degree has not been
selected.
The water tap is not turned on.
(Error code:
)
The drain filter is clogged.
(Error code:
)
The machine is overloaded.
The selected drying program,
time or dryness level was not
suitable for the laundry.
Machine is optimizing the drying
cycle according to the laundry type
and load size. It will vary for each
kind of fabric as the water
absorption is different.
Solution
Select the drying time or
the dryness level degree.
Open the water tap.
Clean the drain filter.
Reduce the laundry load in
the drum.
Select the suitable drying
program, time or dryness
level for the laundry.
This is a normal behavior
of the machine and not a
cause for concern as it
does not compromise its
performance.
Advertisement
Table of Contents
