Table of Contents
Advertisement
3. Press the symbol
assisted cleaning cycle will start.
4. If the temperature inside the oven is too
high, a warning buzzer and message on
the display will instruct you to wait for it to
cool.
5. A buzzer will indicate the end of the
Vapor Clean cycle.
Cleaning and maintenance
to confirm. The
Setting programmed Vapor Clean
It is possible to program the Vapor Clean
start time, like any cooking function.
1. After selecting the Vapor Clean special
function, press the symbol
2. Enter the time at which you require the
Vapor Clean function to end (for
example at 7:30 p.m. first touch the hours
box, then the numbers 1 and 9; touch the
minutes box, then the numbers 3 and 0).
3. Press the symbol
4. The appliance waits until the set start time
to start the cleaning cycle.
.
to confirm.
51
Advertisement
Table of Contents
