Table of Contents
Advertisement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user's authority to operate the equipment.
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
•
Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
•
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
•
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
•
Using supplies or parts not meeting the products' specifications may cause damage,
deterioration or malfunction.
•
Refer all servicing to qualified service personnel.
•
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
•
Do not put any heavy items on the extension cable in case of extrusion.
•
Do not remove the housing of the device as opening or removing housing may expose
you to dangerous voltage or other hazards.
•
Install the device in a place with good ventilation to avoid damage caused by
overheating.
•
Keep the module away from liquids.
•
Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module immediately.
•
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
•
Unplug the power cord when left unused for a long period of time.
•
Information on disposal for scrapped devices: do not burn or mix with general
household waste. Please treat them as normal electrical waste and recycle the devices
properly.
FCC Statement
Safety Precautions
Advertisement
Table of Contents
