Package Contents; Installation; Attaching Or Removing The Base - Sceptre X405BV Manual

Package Contents

SCEPTRE Display x 1
Display Foot x 2
User Guide x 1
Screws x 4 (ST4 x 12mm)
Power Cord x 1 (Attached)
Warranty Card x 1
Display Remote Control (AAA Batteries included) x 1

Installation

Please read the user manual carefully before performing the installation. Please use
the power cord designated for the product. When an extension cord is required, use one
with the correct power rating. The cord must be grounded and the grounding feature
must not be defeated. The product should be installed on a flat surface to avoid tipping.
Space should be maintained between the back of the product and the wall for proper
ventilation. Avoid installing the product in the kitchen, bathroom or other places with
high humidity dust or smoke, so as not to shorten the service life of the electronic
components. Please ensure the product is installed with the screen in landscape
orientation. Any 90° clockwise or counterclockwise installation may induce poor
ventilation and successive component damage.

Attaching or Removing the Base

1. Place the display unit flat on a table. Afterwards attach the plastic feet onto the bottom of the
TV. Install the foot labeled L to the left side of the TV (when you are facing the front of the TV).
Install the foot labeled R to the right side of the TV (when you are facing the front of the TV).
Afterwards insert and tighten the 2 screw to the bottom of each foot.
- 8 -
www.SCEPTRE.com
SCEPTRE X405 HD Display User Manual