Sceptre X405BV Manual page 19

1. Make sure the power of HD Display and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your
DVD player and YPbPr's green connector port on the back of your HD
Display.
Connect the blue color connector to both your DVD player and YPbPr's blue
3.
connector port on the back of your HD Display.
Connect the red color connector to both your DVD player and YPbPr's red
4.
connector port on the back of your HD Display.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your
DVD player and YPbPr's white connector port on the back of your HD Display.
Connect the red color connector to both your DVD player and YPbPr's red
6.
connector port on the back of your HD Display.
7. Turn on the HD Display and your DVD player.
Use the remote control's source button or the source button on the Display to
8.
switch to YPbPr.
Please Note:
•
Sometimes DVD players will not automatically output to YPbPr.
You will need to configure your DVD player with AV connection first
then switch to YPbPr. Please reference the DVD player's manual,
to make sure the DVD player is configured to output correctly to the
Display.
•
This source shares audio jacks with AV video.
SCEPTRE X405 HD Display User Manual
- 19 -
www.SCEPTRE.com