Installing Batteries To The Remote Control - Sceptre X405BV Manual

POWER – Turns the display on or off.
1.
INFO – Shows the display info.
2.
NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you
3.
are watching the display. The channel will change after 2 seconds.
(-) – Inserts the dash for selecting digital channels directly.
4.
R – Returns to the previous channel.
5.
VOL(+)/VOL(-) – Press the VOL buttons to increase or decrease the sound level.
6.
▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the
7.
display's menu. Press the ENTER button when you want to select a particular
option.
CH(+)/CH(-) – Press the CH buttons to switch to the next or previous channel.
8.
MENU – Brings up the main display menu on the screen.
9.
10. GUIDE – Opens the current digital channel information guide (antenna only).
11. EXIT – Exit the main display menu on the screen.
12. SOURCE – Press this button to cycle through INPUT source.
13. CC – Cycles between different closed captioning modes.
14. MUTE – Turns the sound off from the display. To un-mute either press VOL(+) or
press the MUTE button again.
15. FAV – Gives you your list of favorite channels.
16. F.ADD/DEL – Adds or Deletes current channel from favorite list.
17. SLEEP – Turns the TV off in a specific set of time dependent on your selection.
18. USB – This button switches the source to USB.
19. YPbPr – This button switches the source to YPbPr.
20. HDMI – This button switches the source to HDMI.
The following buttons are functions designed to work with the optional, Sceptre
Sound Bar.
21. POWER – This button turns on the sound bar.
22. SOURCE – This button selects the sound bar's source.
23. MODE – This button selects the sound bar's sound modes.
24. VOL(-) – This button decreases the volume of the sound bar.
25. VOL(+) – This button increases the volume of the sound bar.
Color Function Buttons
26. A – This button has no function assigned.
27. B – This button turns on or off the TV's voice guidance for the visually impaired.
28. C – This button has no function assigned.
29. D – This button has no function assigned.
Please Note:
Buttons encircled by the word SOUND BAR are to be used with a Sceptre's
sound bar only.

Installing Batteries to the Remote Control

- 16 -
www.SCEPTRE.com
SCEPTRE X405 HD Display User Manual