Deep Print Head Cleaning - Canon PIXMA E474 Online Manual

Deep Print Head Cleaning

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean
the print head deeply only when necessary.
1. Make sure that the power is turned on.
2. Hold down the Stop button until the Alarm lamp flashes three times, then release it
immediately.
The printer starts cleaning the print head deeply.
The cleaning will be complete when the ON lamp lights after flashing.
Do not perform any other operations until the printer completes the deep cleaning of the print head. This
takes about 1 minute.
3. Check the print head condition.
To check the print head condition,
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.
If the problem is still not resolved,
If the problem is still not resolved after replacing the FINE cartridge, contact your nearest Canon service
center to request a repair.
print the nozzle check
replace the FINE cartridge
52
pattern.
with a new one.