(4) Transmission system
(5) Used code
(6) Bit composition
Start bit
Data bit
Parity bit
Stop bit
(7) Error detection
(8) Error correction
5) External trigger input
External trigger input is assigned on CC2 port.
6) Signal level
LVDS 290mVp-p with 100Ω termination
2. DC IN/SYNC input and output (DC IN/SYNC connector)
1) External HD/VD signal input
HD/VD: 2 to 5 Vp-p, Negative
2) External trigger signal input (Photo-coupler)
low 0 Vdc, high 3 to 24 Vdc
: Bit serial
: 8-bit binary
: 1-bit
: 8-bit
: None
: 1-bit
: 1. SUM check (16-bit)
: 2. Time check (Time between, the respond command and
: Request repeat system
(see NOTE 2)
(see NOTE 1)
ACK, NAK receiving should be less than 0.5 second.)
(see NOTE 2)
Photo-coupler input part
2.5K ohm
TRIG (H)
TRIG (C)
36
Need help?
Do you have a question about the HV-F31CL and is the answer not in the manual?
Questions and answers