-Trigger mode-
MODE 0
MODE 1
-Trigger polarity-
Select positive or negative trigger pulse polarity.
NEGATIVE
POSITIVE
-Flash pulse width-
Select width of flash pulse output.
NARROW
MIDDLE
WIDE
VARIABLE
-Flash pulse delay / Flash pulse width-
Set the delay time of flash pulse output when Flash pulse width is NARROW / MIDDLE / WIDE.
Set the flash pulse width when Flash pulse width is VARIABLE.
Setting value 30CExxxx h
The delay time can be varied from 2 us (8000h) to 263.96 ms (7FFFh).
The flash pulse width can be varied from 4 us (8000h) to 263.96 ms (7FFFh).
For the details about trigger operation, see the timing chart (page 41-44).
17
: Exposure timing is linked with flash pulse output.
Setting value 203600FC h
: Exposure timing is linked with trigger pulse rising/falling edge.
Setting value 203601FC h
: Setting value 203600DF h
: Setting value 203620DF h
: Setting value 204801F0 h
: Setting value 204802F0 h
: Setting value 204803F0 h
: Setting value 20480FF0 h
xxxx: 8000h to 7FFFh (signed)
Need help?
Do you have a question about the HV-F31CL and is the answer not in the manual?
Questions and answers