Maytag MVWB835DW1 Use & Care Manual page 11

8.
Select cycle
Turn cycle knob to choose your wash cycle.
9.
Select Temperature
Once you select a cycle, select the wash temperature by
touching the Temperature button to the desired setting.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your items. If not sure on which temperature to
use, refer to the chart below or select a cooler temperature.
Light soils Moderate soils
Colors that bleed
or fade
NOTE: Even for cold wash settings, some warm water
may be added to the washer to maintain a minimum temperature.
Heavy Soils
Bright colors
10.
Select SOIL LEVEL
Once you select a cycle, select the soil level by touching the
Soil Level button to the desired setting.
11.
Select cycle options, if desired
If you would like to add an Extra Rinse and/or Oxi option, touch
the button for that feature.
12.
Touch and hold START/Pause
button to begin wash cycle
Touch and hold START/PAUSE button for 3 seconds to start the
wash cycle. When the cycle has finished, the end of cycle signal
Whites
will sound (if set). Promptly remove items when cycle is done to
Pastels
avoid odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE button to pause washer; the lid will unlock
once the washer movement has stopped. This may take several
minutes if the load was spinning at a high speed. Then close lid
and touch and hold START/PAUSE button again for 3 seconds to
restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes the
water will pump out and F8E6 error code will appear on the
display.
11