User Interface Setup - Kenwood DMX958XR Instruction Manual

Setup

User Interface Setup

You can setup user interface parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each parameter as follows.
[Small Audio Text]
■
Change the text size for the source control
screen.
[ON] : Change the text size smaller.
[OFF] (Default): Cancel.
■ [Beep]
Turn the key touch tone on or off.
Default is "ON".
[Widget SETUP]
■
Set up the widget displayed on the Home
screen. (P.19)
[Parking Assist Display]
■
When the iDatalink (commercially available)
is connected, you can display information
about obstacles around the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDatalink
(commercially available) is connected.
70
[Parking Assist Position]
■
Select where to display information about
obstacles on the screen (left or right).
"Left"/"Right" (Default)
This can be set when the iDatalink
(commercially available) is connected.
[Language Select]
■
Select a language.
[Time Format]
■
■ [Clock]
[Time Zone]
■
[Clock Adjust]
■
You can set the date and time. See Adjust
the date and time manually (P.10).