Advertisement
Quick Links
Advertisement
Summary of Contents for Inline 76696B
- Page 1 Art. No. 76696B PCI-Express 2.0 SATA 6Gbps Controller Card USER’S MANUAL...
- Page 2 INTRODUCTION The PCI-Express SATA controller card enables Serial ATA PHY up to 6.0Gbps high speed interface utilizing a native 1-Lane PCI Express 2.0 interface. The card supports SATA 6Gbps devices compliant with Serial-ATA Revision 3.0 specification. It is also backward compatible with SATA 1.5Gbps and 3.0Gbps devices. The LED indicator headers on the card are specially designed so that the front panel LED indicator can show Read/Write activities of any hard disk drives connected to the card or to the motherboard.
- Page 3 Connect the power cable to the hard disk(s). Connect the SATA hard disk(s) to the controller card with the SATA cable. Connect the computer case’s front panel Hard Disk LED cable to pin header (See Figure 1) Figure 1 Connect the one end of the LED cable (included) to pin header JP10, and the other end to your motherboard’s HDD LED connector Secure the computer case and switch on your computer.