Connecting To Composite Video Source Devices; Audio Playback With The Projector - ViewSonic VS16500 User Manual

Connecting to composite video source devices

Examine your Video source device to determine if an unused composite output jack is
available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method to use to connect to the device.
1. Take a Video cable and connect one end to the composite Video output socket of the
Video source device.
2. Connect the other end of the video cable to the VIDEO socket on the projector.
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and operating
correctly. You must also check that the signal cables have been connected correctly.
You need only connect to this device using a composite Video connection if Component Video
and S-Video inputs are unavailable for use. See
details.

Audio playback with the projector

During demonstration, you may use the projector (mixed dual channel) speakers or
connect separate sound systems with sound amplification functions to the AUDIO OUT
sockets on the projector.
If you have a separate sound system, you should connect the audio output of your Video
source device to this sound system instead of the mono audio input on the projector.
"Connecting to Video source devices"
18
for