Table of Contents
Advertisement
GSM-PRO2
4 Configuration
4.1
Connect to the module
Connect 24VDC to the module and connect a USB cable between the module and a PC USB port. Wait for the
module to start up and run the module interface software.
On start up the configuration software searches all available COM ports for an available module. When found,
the software downloads the diagnostic data and prompts to download the settings from the device. If chosen
yes, the user interface will be automatically updated.
If the module is found the 'module type' at the upper left side will appear.
- 9 -
Advertisement
Table of Contents
Need help?
Do you have a question about the GSM-PRO2-GPS and is the answer not in the manual?
Questions and answers