1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Hob
  5. ZGX65414
  6. User manual

Zanussi ZGX65414 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
GETTING
STARTED?
EASY.
ZGX65414
EN User Manual
Hob
GB

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZGX65414

Summary of Contents for Zanussi ZGX65414

  • Page 1 User Manual GETTING STARTED? EASY. ZGX65414 EN User Manual...

  • Page 2: Safety Information

    SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 3: Safety Instructions

    CAUTION: The cooking process has to be supervised. A short • term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking • surfaces. Metallic objects such as knives, forks, spoons and lids should •...

  • Page 4: Electrical Connection

    • Do not install or use a damaged appliance. hot cookware, when you connect the appliance • Follow the installation instruction supplied with to the near sockets the appliance. • Do not use multi-plug adapters and extension • Keep the minimum distance from the other cables.
  • Page 5 • Make sure that the ventilation openings are not • Do not install a flame diffuser on the burner. blocked. • The use of a gas cooking appliance results in • Do not let the appliance stay unattended during the production of heat and moisture. Provide operation.

  • Page 6: Product Description

    PRODUCT DESCRIPTION COOKING SURFACE LAYOUT Semi-rapid burner Rapid burner Auxiliary burner Control knobs CONTROL KNOB Symbol Description Symbol Description minimum gas supply no gas supply / off position ignition position / maximum gas supply DAILY USE WARNING! Refer to Safety chapters.

  • Page 7: Hints And Tips

    BURNER OVERVIEW 3. Adjust the flame after it is regular. If after some tries the burner does not light, check if the crown and its cap are in correct positions. WARNING! Do not keep the control knob pushed for more than 15 seconds.

  • Page 8: Care And Cleaning

    WARNING! Do not put the same pan CAUTION! Liquids spilt during on two burners. cooking can cause the glass to break. WARNING! Do not put unstable or DIAMETERS OF COOKWARE damaged pots on the burner to Use cookware with diameters prevent from spill and injury.

  • Page 9: Periodic Maintenance

    PERIODIC MAINTENANCE components well clean to prevent difficult lighting and check that the burner crown holes are not Speak to your local Authorised Service Centre obstructed. periodically to check the conditions of the gas supply pipe and the pressure adjuster, if fitted. TROUBLESHOOTING WARNING! Refer to Safety chapters.

  • Page 10: Installation

    LABELS SUPPLIED WITH THE ACCESSORIES Stick the adhesive labels as indicated below: MOD. MOD. MOD. TYPE PROD.NO. IP20 PROD.NO. PROD.NO. SER.NO. 0049 SER.NO SER.NO 03 IT DATA DATA MADE IN ITALY A. Stick it on Guarantee Card and send this part C.

  • Page 11: Injectors Replacement

    If there are other fuel burning appliances in the The connection should be suitable for connecting same room, B.S. 5440 Part 2 Current Edition, to R 1/2 (1/2 BSP male thread). should be consulted to determine the requisite air When the final connection has been made, it is vent requirements.
  • Page 12 • or E — Earth terminal Before carrying out the connection, make sure: 1. The limiter valve and the electrical system can take the appliance load (see the rating plate) 2. The supply system is equipped with an efficient earth connection in compliance with the current standards and regulations 3.
  • Page 13 REPLACEMENT OF THE CONNECTION ASSEMBLY CABLE The replacement of electric cable must be carried out exclusively by the service force centre or by personnel with similar competencies, in accordance with the current regulations. To replace the connection cable use only H03V2V2-F T90 or equivalent type.

  • Page 14: Technical Data

    POSSIBILITIES FOR INSERTION If a furniture unit is installed at a distance of 400 mm above the The panel installed below the hob must be easy to hob, there must be a minimum remove and let an easy access in case a technical safety distance of 50 mm to the assistance intervention is necessary.
  • Page 15 BYPASS DIAMETERS BURNER Ø BYPASS 1/100 mm Rapid Semi-rapid Auxiliary OTHER TECHNICAL DATA Gas original: G20 (2H) 20 mbar = 7,7 kW TOTAL POWER: Gas replacement: G30 (3+) 28-30 mbar = 545 g/h G31 (3+) 37 mbar = 536 g/h Electric supply: 220-240 V ~ 50/60 Hz 3 core flexible cable with non rewireable plug fitted with a 3 amp car-...

  • Page 16: Energy Efficiency

    ENERGY EFFICIENCY PRODUCT INFORMATION ACCORDING TO EU 66/2014 Model identification ZGX65414BA Type of hob Built-in hob Number of gas burners Centre rear - Semi-rapid 54.1% Left middle - Semi-rapid 58.3% Energy efficiency per gas burner (EE gas burner) Right middle - Rapid 53.0% Centre front - Auxiliary not applicable...
  • Page 20 WWW.ZANUSSI.COM/SHOP...

Table of Contents