• Cleaning and user maintenance shall not be made by children without supervision. General Safety • The appliance and its accessible parts become hot during use. Do not touch the heating elements. • Do not operate the appliance by means of an external timer or separate remote-control system. www.zanussi.com...
(if applicable) or to the mains cable. • The bottom of the appliance can get hot. We Contact the Service or an electrician to recommend to install a non-combustile sepa- change a damaged mains cable. www.zanussi.com...
Page 4
• Set the cooking zone to “off” after use. lation, for example increasing the level of me- chanical ventilation where present. • Do not use the appliance as a work or as a storage surface. www.zanussi.com...
Product description Cooking surface layout Semi-rapid burner Triple Crown burner Auxiliary burner Control knobs Control knobs Symbol Description ignition position / maxi- Symbol Description mum gas supply no gas supply / off posi- tion minimum gas supply www.zanussi.com...
1 minute. The spark generator can start automatically when you switch on the mains, after instal- lation or a power cut. It is normal. Turning the burner off To put the flame out, turn the knob to the sym- www.zanussi.com...
• To clean the enamelled parts, cap and crown, wash them with warm soapy water and dry them carefully before you put them back. • Wash stainless steel parts with water, and then dry them with a soft cloth. www.zanussi.com...
However, if the room has a door which opens lation I.S. 813 Current Editions and the ETCI directly to the outside no air vent is required Rules for Electrical Installations. even if the volume is between 5 m³ and 11 m³. www.zanussi.com...
Page 10
1. Remove the pan supports. 2. Remove the caps and crowns of the burner. 3. With a socket spanner 7 remove the injec- tors and replace them with the ones which are necessary for the type of gas you use www.zanussi.com...
Page 11
3 amp ASTA-ap- appliance. Always pull the mains plug. proved (BS 1362) fuse. • The appliance must not be connected with an extension cable, an adapter or a multiple socket. There is a risk of fire. www.zanussi.com...
Page 12
There must be no cut or stray strands of wire present. The cord clamp must be correctly at- tached to the outer sheath. To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the www.zanussi.com...
Electric supply: 230 V ~ 50 Hz 3 core flexible cable with non rewireable plug fitted with a 3 amp car- tridge fuse Category: II2H3+ Gas connection: R 1/2" Gas supply: G20 (2H) 20 mbar Appliance class: By-pass diameters www.zanussi.com...
• Appliance hasn't been serviced, maintained, place the same FREE OF CHARGE for labour, repaired, taken apart or tampered with by materials or carriage on condition that: person not authorised by us. www.zanussi.com...
AEG-Electro- 08445 611 611 • Products of Electrolux manufacturer that are not marketed by Electrolux Zanussi- 08445 612 612 Electrolux Service and Spare Parts.Please contact your local Service Force Centre: 08445 616 For Customer Service in The Republic of...
Page 16
Slavonska avenija 3, 10000 Zagreb Ireland +353 1 40 90 753 Long Mile Road Dublin 12 Italia +39 (0) 434 558500 Corso Lino Zanussi, 30 - 33080 Porcia (PN) Latvija +371 67313626 Kr. Barona iela 130/2, LV-1012, Riga Lietuva +370 5 278 06 03...
Page 17
Electrolux Service, S:t Göransgatan 143, S-105 45 Stockholm Türkiye +90 21 22 93 10 25 Tarlabaşı caddesi no : 35 Taksim İstanbul Россия 8-800-200-3589 129090 Москва, Олимпийский проспект, 16, БЦ "Олимпик" Україна +380 44 586 20 60 04074 Київ, вул.Автозаводська, 2а, БЦ "Алкон" www.zanussi.com...
Need help?
Do you have a question about the ZGX65424XA and is the answer not in the manual?
Questions and answers