Leupold GX-5i Operating Instructions Manual page 26

YARDS/METERS MODE
NOTE: "SET UP" will briefly flash before transition to YARDS/METERS.
This mode allows you to toggle between yards or meters for the measurement
output unit. When set to Yards mode, all temperature settings will be in Farenheit.
When set to Meters mode, all temperature settings will be in Celsius.
TO CHANGE FROM YARDS TO METERS:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 1 second and
then release to enter the Quick Set Menu.
3) Press and release MODE until "Set Up" flashes
briefly in the display, followed by the word
"Unit" shown steadily in the lower display.
4) While the word "Unit" is shown in the lower
display, press and release POWER as necessary
to toggle between "YD" for Yards and "M" for
Meters, which will be shown in the lower right portion
of the display.
23