Leupold GX-5i Operating Instructions Manual page 14

11
When you press and hold the MODE button for 2 seconds and then release it, the
Quick Set Menu is activated. To set or activate a mode, you must advance to that
function by pressing the MODE button until that function is displayed. To activate
or manipulate a function, press the POWER button as necessary. If this is the last
function to be set, allowing the rangefinder to sit idle for 30 seconds will cause an
automatic power-off, saving all selections. If additional set up is required, simply
press MODE to continue through the Quick Set Menu.
Pressing and holding MODE for at least 2 seconds at any time will exit the Quick
Set Menu, save all previous changes, and prepare the rangefinder for immediate
use. To reset your GX-5i to factory settings, press POWER to activate the unit.
3
With the rangefinder activated, press and hold MODE, then immediately press
and hold POWER while continuing to hold MODE depressed. After the 10-second
timer shown in the display reaches zero, the rangefinder will return to factory set-
tings.