Loading Envelopes - Canon MG3500 Series Online Manual

Hide thumbs Also See for MG3500 Series:
Table of Contents

Advertisement

Loading Envelopes

You can load Envelope DL and Envelope Com 10.
The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver
properly.
Important
Printing of envelopes from the operation panel is not supported.
Do not use the following envelopes. They could jam in the machine or cause the machine to malfunction.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap
- Envelopes whose gummed flaps are already moistened and adhesive
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the opposite direction.
If the corner of the envelope flap is folded, flatten it.
Use a pen to press the leading edge in the inserting direction flat and sharpen the crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make sure that no curl or
puff exceeds 0.1 inches (3 mm).
2.
Load envelopes.
(1)
Open the front cover gently, and extend the paper support.
70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mg3560Mg3550

Table of Contents