Adjusting Oven Temperature; Restoring Factory Default Settings - Frigidaire Gallery FGIF3061NFF Use & Care Manual

Electric range with induction cooktop
Table of Contents

Advertisement

Adjusting the oven temperature
Your appliance has been factory calibrated and tested
to ensure an accurate baking temperature. For the first
few uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is
cooking too hot or too cool for your recipe times, you can
adjust the control so the oven cooks hotter or cooler than
the temperature displayed.
The oven temperature may be increased +35°F (+19°C)
or decreased -35°F (-19°C) from the factory settings.
Example: increase the oven temperature by 30°F:
Step
1. Press and hold bake
for 6 seconds.
2. Enter 30.
3. Press start.
Example: decrease the oven temperature by 30°F:
Step
1. Press and hold bake
for 6 seconds.
2. Enter 30.
3. Press self-clean.
4. Press start.
NOTES
Oven temperature adjustments made will not affect the
broil or self-cleaning feature temperatures.
If the temperature shows an adjustment of -30°F, and
a +30°F adjustment is needed, you can toggle between
the (-) or (+) in the display by pressing self clean.
DO NOT USE oven thermometers such as those found in
grocery stores to check the temperature settings inside
your oven. These oven thermometers may vary as much
as 20 to 40 degrees from actual temperatures.
32

Restoring factory default settings

When new, your appliance left the factory with
predetermined oven control default settings. Over time,
the user may make changes to these settings. The
following options have user preferences that could be
modified and may have been changed since the appliance
was new:
• 12 or 24 hour display mode
• Continuous bake or 6-Hour Energy Savings mode
• Silent control panel
• Oven temperature display (Fahrenheit or Celsius)
• Adjusting the oven temperature
Press
Please remember that if you choose to restore, ALL of
the above preferences will be restored to factory default
settings, the oven temperature offset will reset and any
stored information will be cleared.
To restore all user settings to factory default:
Step
1. Press and hold 7 key pad
until first beep sounds
Press
(about 6 seconds).
2. Press start.
SETTING OVEN CONTROLS
Press

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gallery fgif3061nfcGallery fgif3061nf

Table of Contents