Frigidaire GCRG3060AFC Use & Care Manual page 45

Removing and Replacing the Oven Door
CAUTION
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
To remove the oven door:
1. Open oven door completely, horizontal with floor.
2. Pull up the lock located on each hinge support toward
front of the oven until the lock stops. You may have to
apply a little upward pressure on the lock to pull it up
(Figure 42 and Figure 43).
3. Grasp the door by the sides, and close the door until the
door frame makes contact with the unlocked hinges.
4. Pull the bottom of the door toward you while rotating the
top of the door toward the appliance to completely
disengage the hinge levers (Figure 44).
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (Figure 44).
2. Hold the oven door at the same angle as the removal
position. Carefully insert the hinge levers into the oven
frame until you feel the hinge levers are seated into the
hinge notches. The hinge arms must be fully seated into
the hinge notches before the oven door can be fully
opened. (Figure 44).
3. Fully open the oven door, horizontal with floor (Figure
41).
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the
locked position (Figure 43 and 42).
5. Close the oven door.
IMPORTANT
Special door care instructions - Most oven doors contain
glass that can break. Do not hit the glass with pots, pans,
or any other object. Scratching, hitting, jarring, or
stressing the glass may weaken its structure, causing an
increased risk of breakage at a later time. Do not close
the oven door until all of the oven racks are fully in place.
CARE AND CLEANING
Figure 41: Door hinge location
Figure 42: Door hinge locks
Figure 43: Unlocking door hinge
Hinge
notch
Figure 44: Replacement and location of hinge arm and
roller pin
Oven door
hinge
locations
Door frame flush
with hinge lock
45