Air Burners T-400 Operating Manual page 14

12. Swing the manifolds out and secure
them by fitting the locking bolt from
Step 8.
13. Lower the two rear jacks so that the
manifold rests squarely on the ground.
14. With the machine and manifold posi-
tioned, you can now mark-out the di-
mensions for the pit.
NOTE: THE FRONT OF THE TRAILER
WILL RISE. THIS IS NORMAL.
T-Sereis Carrier pipe fully extended,
Manifolds partially extended
T-400 Air Curtain Trench Burner with Kubota V3600-TE Engine
Page 10 of 34
OPERATING MANUAL
Locking bolt at center of the manifold
Rear Jack stands
T-Series Carrier pipe fully extended
and manifold on the ground
Air Burners, Inc.
(Vers. 09.15)