Table of Contents
Advertisement
MANIFOLD ASSEMBLY WINCH OPERATION
DANGER:
the manifold from sliding in or out unintentional-
ly. Do not operate the winch or release the Ratch-
et, if the manifold will slide out unattended.
A. WINCH OPERATION FOR PULLING OUT
MANIFOLD/CARRIER PIPE ASSEMBLY
1. Level trailer.
2. Release ratchet by pushing the ratchet release lever
forward-down (See Photo on right).
3. Proceed with manifold extraction following the in-
structions on Pages 8 through 10.
DANGER:
handle, as it will be spinning during manifold ex-
traction. A spinning handle can cause severe in-
jury.
B. WINCH OPERATION FOR RETRACTING MANIFOLD/
CARRIER PIPE ASSEMBLY BACK IN THE TRAILER
1. Level trailer.
2. Follow instructions for transport and storage on
Page 26.
3. Engage the ratchet by pushing it up .
4. Crank the handle.
5. Crank the manifold in until the safety bolt hole lines
up with the bracket.
6. Install the safety bolt and secure it with nut and
cotter pin (see Photo on right).
7. For added security, leave the nylon strap tension
tight.
T-400 Air Curtain Trench Burner with Kubota V3600-TE Engine
The trailer must be level to prevent
Be sure to keep hands clear off
Page 11 of 34
Air Burners, Inc.
OPERATING MANUAL
Ball hitch adapter (optional),
safety chains, pigtail,
winch & front jack stand
Ratchet
(Vers. 09.15)
Advertisement
Table of Contents
