Vivotek 4712123679846 User Manual page 211

7.16 Motion detection settings
Group: motion_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin"
NAME
enable
win_sensitivity
Group: motion_c<0~(n-1)>_win_i<0~(k-1)>
n denotes the value of "capability_nvideoin", k denotes the value of "capability_nmotion".
NAME
enable
name
polygonstd
objsize
sensitivity
<Not recommended to use
this>
polygonpx
<Not recommended to use
this>
VALUE SECURITY
(get/set)
<boolean> 4/4
0 ~ 100 4/4
VALUE SECURITY
(get/set)
<boolean> 4/4
string[14] 4/4
0 ~ 9999,0 ~ 9999, 4/4
0 ~ 9999,0 ~ 9999,
0 ~ 9999,0 ~ 9999,
0 ~ 9999,0 ~ 9999
1 ~ 100 4/4
0 ~ 100 4/4
0 ~ W,0 ~ H, 0 ~ 4/4
W,0 ~ H, 0 ~ W,0 ~
H, 0 ~ W,0 ~ H
W: 0~ The current
image width -1
DESCRIPTION
Enable motion detection.
Sensitivity of all motion detection windows.
* The value "0" is reserved for compatibility
and will not be used after the version number
(httpversion) is equal or greater than 0400a.
DESCRIPTION
Enable motion detection window.
Name of motion window.
Coordinate of polygon window position.
(4 points: x0,y0,x1,y1,x2,y2,x3,y3)
* Only available when
"capability_motion_wintype" = polygon.
* Only available when std is listed in
"capability_motion_windomain"
Percent of motion detection window.
Sensitivity of motion detection window.
* We replace "sensitivity" with
"win_sensitivity".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
Coordinate of polygon window position.
(4 points: x0,y0,x1,y1,x2,y2,x3,y3)
* Only available when
"capability_motion_wintype" = polygon.
VIVOTEK
User's Manual - 211