Lenovo 20JA User Manual page 102

To replace the M.2 solid-state drive, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 79.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display and turn the computer over.
4. Loosen the screws
5. Remove the screws that secure the M.2 solid-state drive bracket
state drive bracket
6. Remove the M.2 solid-state drive out of the slot.
86
ThinkPad S5 2nd Generation User Guide
1 and then remove the bottom cover
3
.
2 .
1 2 , and then remove the M.2 solid-