Bosch SMV69M01GB Instruction Manual page 38

en Fault, what to do?
Fault
Door does not open
automatically at the end of
the Eco 50° programme.
Door does not open.
38
Reason
The child-proof lock is activated.
Eco drying deactivated.
Eco 50° programme not
selected.
Additional function selected.
Intensive drying switched on.
Door is not set correctly.
Wrong screws used to adjust the
door gap. If excessively long
screws are screwed in, they may
deactivate Eco drying.
Safety device switches the Eco
drying function off. A technical
fault has probably occurred.
The child-proof lock is activated.
Door is not set correctly.
Appliance is disconnected from
the mains.
Door and door seal dirty.
Automatic door opening system
not in home position.
Remedial action
Deactivate the child lock (see chapter
"Operating the appliance").
Activate Eco drying (see chapter "Operating
the appliance").
Select Eco 50° programme.
Deselect additional function.
Switch off intensive drying.
Set the door correctly with the aid of the
installation instructions so that the door gap
is min. 70 mm - 100 mm.
To adjust the door gap, use screws which
have a max. size of ø 4X30 (included in the
product package, see installation
instructions).
Call the after-sales service.
Press twice in quick succession on the door
in the middle.
Deactivate the childproof lock (see chapter
"Operating the appliance").
Set the door correctly with the aid of the
installation instructions.
Check mains plug and fuses.
Attach supplied emergency release to upper
right and left of the furniture panel and open
the door by gently pulling the emergency
release.
Clean door and door seal with a damp cloth
and a little washing-up liquid.
After closing the door, wait one second until
it can be opened again.