Remote Control Button - Panasonic CS-A18GKD Service Manual

13.3. Remote Control Button

13.3.1. SET BUTTON
• To check current remote control transmission code
- Press for more than 10 seconds
• To change the air quality sensor sensitivity
- Press and release with pointer.
- Press the Timer Decrement button to select sensitivity:
1. Low Sensitivity
2. Standard (Default)
3. Hi Sensitivity
- Confirm setting by pressing Timer Set button, a "Beep" sound will be heard. LCD returns to original display after 2 seconds.
- LCD returns to original display if remote control does not operate for 30 seconds
13.3.2. CLOCK BUTTON
• To change the remote control's time format.
- Press for more than 5 seconds
13.3.3. RESET (RC)
• To clear and restore the remote control setting to factory default
- Press once to clear the memory.
13.3.4. TIMER
▲
• To change indoor unit indicator's LED intensity
- Press continuously for 5 seconds.
13.3.5. TIMER
▼
• To change remote control display from Degree Celsius to Degree Fahrenheit.
- Press continuously for 10 seconds.
50