Indoor air purification
Auto Clean operation
In the cooling and dehumidifying operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture.
1
Press
.
A/CLEAN
-
is displayed on the display screen.
ates for 30 minutes and cleans the inside
of the indoor unit.
!
NOTE
Some buttons cannot be used while the
auto cleaning function is in operation.
Skin Care operation
Use the Skin Care mode to keeps skin moisturized.
1
Press
to turn on the power.
2
SKIN
Press
to enter the Skin Care mode
CARE
- Nothing is going to change on the remote control
display screen.
- This mode operates with high fan speed and setting
However, temperature is not changed.
- In this mode, you can change the setting temperature,
fan speed and vane directions.
!
NOTE
- This function can be operated on Cooling
mode, Fan Mode and Plasma mode
environment.
ADVANCED FUNCTIONS
Plasma Purification operation
microscopic contaminants from the intake air
completely to supply clean and fresh air.
1
Press
to turn on the power.
2
Press
.
PLASMA
-
is displayed on the display screen.
!
NOTE
• You can use this function by pressing
without turning the air conditioner on.
PLASMA
• The plasma lamp light up while plasma
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
Press
LIGHT
front grill.
°C/°F Conversion
The unit converses from °C to °F or from °F
to °C if Room Temperature KEY (
is pressed for 5 seconds.
13
)
ROOM TEMP