Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for SNOWJOE Sunjoe 24V-PS10-LTE-RM
Summary of Contents for SNOWJOE Sunjoe 24V-PS10-LTE-RM
- Page 1 CORDLESS POLE CHAIN SAW 24-VOLT MAX* | 2.0 Ah | 10" OPERATOR’S MANUAL Model 24V-PS10-LTE-RM A Division of Snow Joe , LLC ® Form No. SJ-24V-PS10-LTE-RM-880E-M-V1 © 2021 by Snow Joe , LLC SAVE THESE INSTRUCTIONS ® All rights reserved. Original instructions.
-
Page 2: General Safety
+ Sun Joe customer service center at ® ® the battery when it is not in use, before servicing, when 1-866-SNOWJOE (1-866-766-9563). transporting or when changing the chain or other accessories. WARNING! When using the power tool, basic safety 15. Reduce the risk of unintentional starting – Make sure... - Page 3 ® ® of inattention while operating the power tool may result in at 1-866-SNOWJOE (1-866-766-9563) for all maintenance serious personal injury. or operations not foreseen in this manual. Any operation 7. Do not force the pole chain saw while cutting. Apply light performed in an unauthorized service center or by unqualified pressure.
-
Page 4: Cleaning The Tool
Cleaning the Tool 11. Never stand directly under the limb you are trimming. Always position yourself outside the path of falling debris. 12. Keep a firm, steady pressure on the pole chain saw while WARNING! Never let any liquid get inside the motor cutting. -
Page 5: Battery & Charger Safety Instructions
• Do not overreach or extend arms above shoulder height. pack to a power supply plug or car cigarette lighter. Such misuse will permanently disable or damage the battery pack. • Keep solid footing and balance at all times. • Avoid dangerous environments – Do not charge the •... - Page 6 ® ® ® as soon as the performance of the battery falls noticeably customer service center at 1-866-SNOWJOE or the electronic protection system triggers. Place the (1-866-766-9563). battery pack in storage only after it has been fully charged. 3. Electrical plugs must match the outlet. Never modify 8.
- Page 7 6. During periods of heavy use, the battery pack will become and direct sunlight. Only place fully charged batteries in warm. Allow the battery pack to cool to room temperature storage (charged to at least 40%). before inserting it into the charger to recharge. 8.
-
Page 8: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –... -
Page 9: Technical Data
Know Your Cordless Pole Chain Saw Read the owner’s manual and safety instructions carefully before operating the cordless pole chain saw. Compare the illustration below to the cordless pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. -
Page 10: Carton Contents
® ® a few minutes later. The battery cells “recover” some of their 1-866-SNOWJOE (1-866-766-9563). charge after resting. NOTE: Do not discard the shipping carton and packaging Charger Operation material until you are ready to use your new cordless pole chain saw. -
Page 11: Charging The Battery
+ Sun Joe customer ® ® ® service center at 1-866-SNOWJOE (1-866-766-9563). Battery NOTE: When replacing the guide bar and chain, use only indicators identical replacement parts. Make sure the pole chain saw is disconnected with the battery before proceeding with installation. - Page 12 2. Remove the bar and chain from the mounting surface (Fig. 5). Fig. 8 Fig. 5 Mounting surface Cutting chain Loop Guide bar 6. Hold the chain in position on the bar and place the loop around the sprocket. Fit the bar flush against the mounting 3.
-
Page 13: Prepare To Work
Adjusting the Chain Tension Fig. 11 1. Tension the chain by turning the chain tensioning ring clockwise (Fig. 12). A cold chain will be correctly tensioned when there is no slack on the underside of the guide bar; the chain is snug, but it can be turned by hand without binding. -
Page 14: Operation
does not guarantee good lubrication and reduces the lifespan Do not use the pole saw to cut vines and/or small underbrush. of the chain and bar. WARNING! Do not let familiarity with this type of tool IMPORTANT! Before each machine use, the oil level should prevent you from taking all necessary precautions. - Page 15 NOTE: Failure to properly secure the pole saw head may result in personal injury and/or property damage. Telescoping pole cam-locks WARNING! Always ensure the pole saw head is securely locked! Do not attempt to use the pole chain saw with the head in any other position or unlocked! Cutting Tips for Pole Chain Telescoping poles...
- Page 16 cut off the farthest lying limb. This will reduce the weight Fig. 21 and prevent stripping the bark from the main member. • Under cut the branch 1/3 through for your first cut. Your second cut should over cut to drop the branch off (Fig.
-
Page 17: Maintenance & Care
Snow Joe + Sun Joe customer service center ® ® at 1-866-SNOWJOE (1-866-766-9563) for all maintenance Flats are not operations not foreseen in this manual. Any operation visible here performed in an unauthorized service center or by unqualified personnel will completely invalidate the warranty. -
Page 18: Guide Bar Maintenance
If you continue Inspection tool to experience problems or need repairs beyond these minor Depth limiter adjustments, please call 1-866-SNOWJOE (1-866-766-9563) tooth for assistance. WARNING! Always remove the battery before performing any adjustments, maintenance, or repairs to your Cutting edge cordless pole saw. -
Page 19: Troubleshooting Table
Snow Joe ® ® ® Problems Corrective Action Sun Joe customer service center at 1-866-SNOWJOE ® The saw • Check that you have inserted the battery properly (1-866-766-9563) before using it. motor fails and the battery has enough power to work. -
Page 20: Model + Serial Number
24V-PS10-LTE-RM cordless pole ® chain saw requires service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. Model + Serial Number When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. -
Page 21: Optional Accessories
Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this cordless pole chain saw. Contact Snow Joe ® Sun Joe if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless pole chain saw. - Page 22 ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563). Chain Maintenance Table File Diameter Drive Links Chain Pitch Chain Gauge inches...
- Page 23 To obtain a replacement part or product, please visit Some states do not allow exclusions of incidental or consequential snowjoe.com/help or email us at help@snowjoe.com for damages so the above exclusions may not apply in all states. This instructions. Please be sure to register your unit beforehand warranty may give you specific legal rights in your state.
- Page 24 sunjoe.com...
Need help?
Do you have a question about the Sunjoe 24V-PS10-LTE-RM and is the answer not in the manual?
Questions and answers