SNOWJOE SUNJOE 24V-X2-CS16-CT Operator's Manual

OPERATOR'S MANUAL
A Division of Snow Joe , LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire
and/or serious injury. Save all warnings and instructions for
future reference.
m
DANGER!
This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
m
WARNING!
This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
m
CAUTION!
This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
Intended Use
This cordless chain saw was designed and manufactured for
trimming and pruning tree limbs and branches and for cutting
smaller logs up to recommended 14.5 inch (36.8 cm), not to
exceed a max. cut of 15.5 in. (39.4 cm) in diameter depending
on type of wood. All of the wooden objects intended to be cut
with this chain saw should be no thicker than the guide bar's
maximum cutting capabilities.
Improper Use
Any other use differing from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Examples of improper use
include, but are not limited to:
• Trimming hedges;
• Carving;
• Sectioning pallets, crates, and various packing materials;
• Sectioning furniture or other materials with nails, screws, or
other metal components;
• Butchering meat;
• Using the machine to lift, move, or split objects;
• Using the machine while fastened to fixed supports.
© 2019 by Snow Joe , LLC
®
All rights reserved. Original instructions.
CORDLESS CHAIN SAW – CORE TOOL
R
48-VOLT MAX* | 16-INCH
Model 24V-X2-CS16-CT
Improper use of the machine will invalidate the warranty,
relieve the manufacturer from all liabilities. The user will
consequently be liable for all and any damage or injury to
himself/herself or others.
General Safety
m
WARNING!
When using cordless yard tools, basic
safety precautions should always be followed to reduce the
risk of fire, electric shock, and personal injury, including
the following:
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electric Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
SAVE THESE INSTRUCTIONS
1
Form No. SJ-24V-X2-CS16-CT-880E-M