SNOWJOE SUNJOE 24V-X2-CS16 Operator's Manual

SNOWJOE SUNJOE 24V-X2-CS16 Operator's Manual

Cordless chain saw 48-volt max, 2.0 ah, 16-inch

Advertisement

Quick Links

OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire
and/or serious injury. Save all warnings and instructions for
future reference.
m
DANGER!
This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
m
WARNING!
This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
m
CAUTION!
This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
Intended Use
This cordless chain saw was designed and manufactured for
trimming and pruning tree limbs and branches and for cutting
smaller logs up to recommended 14.5 inch (36.8 cm), not to
exceed a max. cut of 15.5 in. (39.4 cm) in diameter depending
on type of wood. All of the wooden objects intended to be cut
with this chain saw should be no thicker than the guide bar's
maximum cutting capabilities.
Improper Use
Any other use differing from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Examples of improper use
include, but are not limited to:
• Trimming hedges;
• Carving;
• Sectioning pallets, crates, and various packing materials;
• Sectioning furniture or other materials with nails, screws, or
other metal components;
• Butchering meat;
• Using the machine to lift, move, or split objects;
• Using the machine while fastened to fixed supports.
© 2019 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
CORDLESS CHAIN SAW
R
48-VOLT MAX* | 2.0 Ah | 16-INCH
Model 24V-X2-CS16
Improper use of the machine will invalidate the warranty,
relieve the manufacturer from all liabilities. The user will
consequently be liable for all and any damage or injury to
himself/herself or others.
General Safety
m
WARNING!
When using cordless yard tools, basic
safety precautions should always be followed to reduce the
risk of fire, electric shock, and personal injury, including
the following:
Work Area Safety
1. Keep work area clean and well lit – Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust – Power tools create sparks which may ignite the
dust or fumes.
3. Keep children and bystanders away while operating a
power tool – Distractions can cause you to lose control.
Electric Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions
– Water entering a power tool will increase the risk of
electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
SAVE THESE INSTRUCTIONS
1
Form No. SJ-24V-X2-CS16-880E-M

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SUNJOE 24V-X2-CS16 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SNOWJOE SUNJOE 24V-X2-CS16

  • Page 1 CORDLESS CHAIN SAW 48-VOLT MAX* | 2.0 Ah | 16-INCH OPERATOR’S MANUAL Model 24V-X2-CS16 A Division of Snow Joe , LLC ® Form No. SJ-24V-X2-CS16-880E-M IMPORTANT! Improper use of the machine will invalidate the warranty, relieve the manufacturer from all liabilities. The user will Safety Instructions consequently be liable for all and any damage or injury to himself/herself or others.
  • Page 2: Personal Safety

    Personal Safety before use – Many accidents are caused by poorly maintained power tools. 1. Stay alert, watch what you are doing and use common 6. Keep cutting tools sharp and clean – Properly sense when operating a power tool. Do not use a maintained cutting tools with sharp cutting edges are less power tool while you are tired or under the influence likely to bind and are easier to control.
  • Page 3: Causes And Operator Prevention Of Kickback

    • Hold the power tool by insulated gripping surfaces exclusively upon the safety devices built into your saw. As a only, because the saw chain may contact hidden chain saw user, you should take several steps to keep your wiring. Saw chains contacting a "live" wire may make cutting jobs free from accident or injury.
  • Page 4: Information About The Battery

    ® ® misuse will permanently disable or damage the battery pack. 1-866-SNOWJOE (1-866-766-9563) for assistance. • Avoid dangerous environments – Do not charge the • Battery chemicals cause serious burns – Never let a battery packs in rain, snow or in damp or wet locations.
  • Page 5: Protection From Environmental Influences

    + Sun Joe ® ® ® in overheating and cell damage. Never charge or work customer service center at 1-866-SNOWJOE with batteries that have been overheated – replace them (1-866-766-9563). immediately, if possible. 3. Electrical plugs must match the outlet. Never modify 7.
  • Page 6: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Descriptions Symbols Symbols Descriptions READ THE OPERATOR'S DANGER! ROTATING MANUAL(S) –...
  • Page 7: Technical Data

    Know Your Cordless Chain Saw Read the owner’s manual and safety instructions carefully before operating cordless chain saw. Compare the illustration below to the cordless chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 8: Carton Contents

    + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). NOTE: If the charge level button does not appear to be working, NOTE: Do not discard the shipping carton and packaging connect the battery to the charger and charge as needed.
  • Page 9: Preparing To Work

    Charging the Batteries 4. Timely recharging of the battery will help prolong the battery's life. You must recharge the battery packs when 1. Press the push lock buttons on the batteries to pull them you notice a drop in the equipment's power. out of the equipment (Fig.
  • Page 10: Chain Lubricant

    Chain Lubricant Fig. 3 IMPORTANT! Only use a good quality bar and chain oil designed specifically for use with chain saws to ensure optimal lubrication of the cutting parts. Do not use oil containing impurities to avoid clogging the tank filter and permanently damaging the oiler.
  • Page 11 WARNING! Do not operate the cordless chain saw in Fig. 8 a tree, on a ladder, or on a scaffold. Using the tool under such circumstances is extremely dangerous. CAUTION! The chain will continue to run for several seconds after turning off the tool. Do not use the chain saw under wet conditions.
  • Page 12: Operating Tips

    Snow Joe + Sun Joe dealer or call the Snow Joe ® ® ® + Sun Joe customer service center at ® 1-866-SNOWJOE (1-866-766-9563) for assistance; – When the machine is not in use.
  • Page 13: Cutting Techniques

    • Hold the saw with both hands firmly. Always keep your left Fig. 11 hand on the front handle and your right hand on the rear handle so that your body is to the left of the chain line. • Keep the unit running the entire time you are cutting, maintaining a steady speed.
  • Page 14 iv) Before felling is started, consider the natural lean of the tree, the location of larger branches and the wind direction Fig. 15 to help you judge which way the tree will fall. v) Remove dirt, stones, loose bark, nails, staples and wire from the tree.
  • Page 15: Maintenance

    ® ® at 1-866-SNOWJOE (1-866-766-9563) for all maintenance • When the log is supported on both ends (Fig. 16C), cut operations not foreseen in this manual. Any operation 1/3 the diameter from the top (overbuck). Then make the...
  • Page 16 + Sun Joe customer Fig. 19 ® ® ® service center at 1-866-SNOWJOE (1-866-766-9563). Sharp cutting edge WARNING! The operation should be completed on a flat and stable surface, with adequate space for moving the machine and its components. Chain drive link...
  • Page 17: Chain Tension

    Snow Joe ® ® ® Sun Joe customer service center at 1-866-SNOWJOE ® (1-866-766-9563). Sharpening is necessary when: NOTE: The chain is correctly tensioned when there is no sag on the underside of the guide bar; the chain is snug, •...
  • Page 18: Guide Bar Maintenance

    Visit sunjoe.com or call the Snow Joe ® burring of the bar rails is a normal process of bar wear. You Sun Joe customer service center at 1-866-SNOWJOE ® should smooth such faults with a file as soon as they occur. (1-866-766-9563) to order.
  • Page 19: Troubleshooting Table

    Troubleshooting Table Sun Joe customer service center at 1-866-SNOWJOE ® (1-866-766-9563) before using it. Problems Corrective Action CAUTION! The saw • Make sure that the batteries are inserted correctly • Remove the batteries and wait at least five minutes for the motor fails saw to cool before servicing or storing your unit.
  • Page 20: Service And Support

    If your Sun Joe 24V-X2-CS16 cordless chain saw requires ® Class B device: service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. NOTE: This equipment has been tested and found to comply Model and Serial Numbers with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 21: Optional Accessories

    Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this saw. Contact Snow Joe + Sun Joe if you are unsure ®...
  • Page 22 ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563). Chain Maintenance Table File Diameter Drive Links Chain Pitch Chain Gauge inches...
  • Page 23 WHO CAN SEEK WARRANTY COVERAGE? Wearing parts like belts, augers, chains and tines are not covered under this warranty, and can be purchased at snowjoe.com or This Warranty is extended by Snow Joe + Sun Joe to the owner ®...
  • Page 24 sunjoe.com...

Table of Contents