Page 1
Warning notices: Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. MVC-V18P Consult with your dealer or manufacturer for details. version 01...
How to identify parts of your vacuum cleaner Cordless vacuum cleaner Charging port Hand vacuum Detachable Low/High hand vacuum mode Power button Battery Dust cup button indicator lever One-click Battery lights dust cup indicator release lights Handle Bottom lid Nozzle Release button for hand vacuum Filter assembly...
Page 4
. Slide wand onto hand vacuum Drywall anchors until it clicks (Fig. 1). nozzle until it clicks (Fig. 2). • Choose location near power outlet. Cord Locate point high enough on wall clip nozzle to hang freely. • Place mount against wall and use pencil to mark drill holes.
Page 5
Power button 1. Click power button once to start (Fig 1). Vacuum starts on High mode. Use Low/ High button to switch between modes. back and forth on area to be cleaned. Avoid oversized or sharp items (such as screws) with cleaner. 3.
Page 6
Use with or without wand. • 2-in-1 upholstery tool: Use brush to vacuum blinds, vents or upholstered surfaces. Use felt portion to clean delicate surfaces. To switch between felt and brush portions, press thumb release and slide brush up or down. How to use hand vacuum Ideal for cleaning stairs.
How to maintain your vacuum cleaner CAUTION Dust cup – Empty after each use Never operate vacuum 1. Press 2. Pull out 3. Press in proper position. WARNING: Moving parts! Recharge cleaner after each use. Press lever to release bottom lid of dust cup Click the dust cup release button, located to empty debris.
Need help?
Do you have a question about the MVC-V18P and is the answer not in the manual?
Questions and answers