Test Running Without Water - LG WF-T1003TP Service Manual

4-6. TEST RUNNING WITHOUT WATER

1) METHOD TO USE QC TEST MODE
• To use the CHECK PROGRAM (QC TEST MODE), press WATER LEVEL, PROCESS
and POWER button ON without depositing any laundry.
• In QC TEST MODE all LEDs are on and press START(PAUSE) button to check over the
following items.
NO CHECK METHOD
1 Initial state
2 Press once
3 Press twice
4 Press 3 times
5 Press 4 times
6 Press 5 times
7 Press 6 times
DISPLAY
• Water level frequency is on
DISPLAY in the condition of no
water in TUB.
• After detecting laundry amount
the number of pulse is on the
DISPLAY.
• AUTO off.
32
CHECK ITEM
• All LEDS ON.
※64~69 DISPLAY.
• Laundry amount test.
• COLD water.
• HOT water. (option)
• If the LID is opened,
DISPLAY. In that case, close the LID.
• DRAIN MOTOR is 1st start.
• DRAIN MOTOR is 2nd start and drain
pump is on.
• All LEDS OFF.
is on the