LG WF-T1003TP Service Manual page 9

Screw Type
1 Attach the water supply hose to the tap.
Push the water supply hose up so that
the rubber packing within the hose can
adhere completely to the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and
then tighten it by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the
faucet to check for any water leakage.
Connecting Water Supply Hose to the machine
Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
Check to see if there is a rubber seal inside
the connector.
Water
H
8
tap
Rubber Packing
Water Supply Hose
Rubber seal