LG WF-T1003TP Service Manual page 20

PRO-
PRO-
GRAM
CESS
WATER
PRO-
TEMP.
CESS
WATER PRO-
LEVEL GRAM
DELAY
ST START ART
START
PAUSE
3
The pulsator rotates for 8
seconds to detect the laundry
load.
Then the water level and the
amount of detergent to be
used will be shown and water
will be supplied.
4
4
4
5
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
Close the lid
5
When the wash
Water will be
program ends, the
supplied for 2
buzzer will ring for
minutes after the
10 seconds before
start of the wash
the Power goes off
to supplement the
automatically.
water the laundry
has absorbed.
6
6
6
7
19
Finish
If water is already in the tub, or putting wet
6
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level
can be set low.
Changes to water temperature (hot/cold)
and wash level are possible during
operation.
(refer to page 12)
7
7
When setting the water level manually, do
7
not set to MEDIUM to prevent damage to
laundry.
Washing with hot water may damage the
laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
8
may still contain some water. This is
normal.
Speedy Soak Wash cannot be selected
for the Wool Wash program.
If wool wash is selected, Gentle Spin will
be set automatically.
Caution & Note