Operating Determinations; Description; Features - Omnitronic CDP-180 User Manual

3. OPERATING DETERMINATIONS

This device is a professional CD-player for playing CDs. This product is allowed to be operated with an
alternating current of 220-250 V AC, 50 Hz ~ or 110-120 V AC, 60 Hz ~ and was designed for indoor use
only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between -5° C and +45° C.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

4. DESCRIPTION

4.1 Features

Modern CD-player in a classic design
All functions located in a well-structured operating field • Comfortable track-selection via Track-buttons and
+10-button • Large Play/Pause-button and Cue-button • Auto Cue-function: the player automatically jumps to
where the music starts • Back Cue-function: by pressing the Cue-button, the player returns to the track-start
or Cue-point • Ergonomic LCD-display of all operation modes • Display switchable from track remain time to
track playback time • Visual warning from 15 seconds before track-end • Pitch-adjustment via Pitchfader is
displayed • Pitch Bend-buttons for synchronizing the bass-beat of 2 signal-sources • Pitch-adjustment of ± 12
% via Pitchfader • Jog/Shuttle-wheel for quick scanning and framewise searching • Sequence-playback via
Loop-button possible • Up to 20 tracks can be programmed • Single-mode for playing one track only •
Open/Close-button locked in playback-mode • LED-display of all important functions • 19"-dimensions
17/43 10602248_V_1_0.DOC