Table of Contents
Advertisement
REMOVING THE DOOR LA
REMOVING THE DOOR LA
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply and gas supply
going to the range.
2. Open the oven door.
3. Remove the cooktop plate, manifold and the
case assembly (see page from 3-4 ~ 3-7 for the
procedure).
4. To remove the door latch:
a) Remove the two screws from the door latch
and remove the latch.
COMPONENT ACCESS
2 Screws
TCH & DOOR SWITCH
TCH & DOOR SWITCH
b) Remove the door latch.
5. To remove the door switch:
a) Remove the door switch from the range.
To do this, squeeze tabs and use a ratchet
extension or a small socket, and tap it out of
the hole with a hammer.
2
b) Disconnect the wires from the terminals.
3-10
1
Wires
Door
Switch
Advertisement
Table of Contents
