Troubleshooting When Using 3D Mode - LG D2341PY Owner's Manual

Troubleshooting When Using 3D Mode

I can see a swirling oil-like pattern on the monitor when the
monitor is turned off.
• This is caused by the interference of external light in the air layer between the
LCD surface and 3D filter.
The pattern becomes almost invisible when you turn on the power again.
I cannot see 3D images properly.
G
If you are not using the
glasses provided with
the monitor,
G
If you view 3D images
outside the optimal
viewing angle or
distance,
G
If you have not set the
resolution,
• When you view 3D images with this monitor, it
is very important that you use the glasses
provided with the monitor. The glasses are
designed to compensate optically for the 3D
filter attached to the surface of the monitor. If
you wear third-party glasses, you may not see
3D images properly on the monitor.
• The optimal viewing angle of the monitor is
between -4° and 8° in vertical direction while
between 85° and -85° in horizontal direction;
the optimal viewing distance is between 50 cm
to 70 cm from the monitor. When you view 3D
images outside the optimal viewing angle or
viewing distance, the images may look
overlapped or not be displayed properly in 3D.
• Please set the resolution of the monitor to the
maximum (1920 x 1080 @ 60 Hz) in the display
settings. The 3D software may not work
properly if the resolution is not set to the
maximum.
23